DOCUMENT | TITLE | COMPLIANCE | DATE |
---|---|---|---|
429IL-24-26 | Engine Fire Extinguisher Discharge Nozzle Protective Caps (Model: 429) | Informational | 10/18/2024 |
429IL-24-21 | Alternative Method of Compliance (AMOC) to Federal Aviation Administration (FAA) Airworthiness Directive (AD) 2024-07-51 (Model: 429) | Informational | 10/10/2024 |
429IL-24-25 | Main Rotor Hub Assembly Repair (Model: 429) | Informational | 10/7/2024 |
505ASB-24-41 | Tailcone Assembly Skins and Frames, One-time and Recurring Inspection of (Model: 505, Jet Ranger X) | Alert | 10/2/2024 |
505TB-21-27 | Restraint Assembly (Live Pylon), Modification and Repair of. (Model: 505, Jet Ranger X) | Technical | 10/2/2024 |
505ASB-24-42 | Tail Rotor Pitch Link Assembly Installation, One-Time Inspection of (Model: 505, Jet Ranger X) | Alert | 10/1/2024 |
505ASB-17-02 | Oil Manifold Assembly Inspection and Clamp replacement (Model: 505, Jet Ranger X) | Alert | 9/11/2024 |
212IL-24-76 | Collective Stick Tube Special Inspection, Change of (Models: 212, 412) | Informational | 9/11/2024 |
412IL-24-96 | Collective Stick Tube Special Inspection, Change of (Models: 212, 412) | Informational | 9/11/2024 |
429IL-24-24 | Improved Air Data/Attitude and Heading Reference System (ADAHRS) (Model: 429) | Informational | 8/29/2024 |
427ASB-24-47 | Main Rotor Expandable Blade Bolt 406-310-103-103, Removal from Service (Model: 427) | Alert | 8/7/2024 |
206-24-144 | Swashplate Outer Ring and Collective Lever, Clearance Check of (Models: 206A/B, TH-67) | Alert | 7/25/2024 |
206L-24-190 | Swashplate Outer Ring and Collective Lever, Clearance Check of (Models: 206L, 206L-1, 206L-3, 206L-4) | Alert | 7/25/2024 |
407-24-136 | Standard and High Landing Gear Forward Crosstubes, Inspection of (Model: 407) | Alert | 7/25/2024 |
407-24-137 | Main Rotor Expandable Blade Bolt 406-310-103-103, Removal from Service (Model: 407) | Alert | 7/18/2024 |
407-24-25 | AFCS Uncommanded Pitch Up With Loss Of SBAS Signal (Model: 407) | Operational | 6/27/2024 |
206-24-143 | Tail Rotor Segmented Driveshaft Assembly, One-Time Inspection Of (Models: 206A/B, TH-67) | Alert | 6/20/2024 |
206L-24-189 | Tail Rotor Segmented Driveshaft Assembly, One-Time Inspection Of (Models: 206L, 206L-1, 206L-3, 206L-4) | Alert | 6/20/2024 |
212-24-78 | Introduction of Bell MissionLink Revision 2 (Models: 212, 407, 412, 429) | Informational | 6/20/2024 |
407-24-130 | Introduction of Bell MissionLink Revision 2 (Models: 212, 407, 412, 429) | Informational | 6/20/2024 |
412-24-97 | Introduction of Bell MissionLink Revision 2 (Models: 212, 407, 412, 429) | Informational | 6/20/2024 |
429-24-23 | Introduction of Bell MissionLink Revision 2 (Models: 212, 407, 412, 429) | Informational | 6/20/2024 |
505-24-40 | Tail Rotor Segmented Driveshaft Assembly, One-Time Inspection Of (Model: 505) | Alert | 6/10/2024 |
505-24-40 | Safran Helicopter Engines, Arrius 2R Service Bulletin No. 319 72 4853 (Module M02, Gas Generator, High Pressure Turbine Blades) (Model: 505) | Informational | 6/20/2024 |
407-24-129 | Main Rotor Blade Bolts, Overhaul Requirement Clarification (Model: 407) | Informational | 6/10/2024 |
429-24-63 Rev. A | Tail Rotor Blade 429-016-101-105 Abrasion Strip, Inspection of (Model: 429) | Alert | 5/30/2024 |
212-24-76 Rev.A | Collective Stick Tube Special Inspection, Change of (Models: 212, 412) | Informational | 5/28/2024 |
412-24-96 Rev.A | Collective Stick Tube Special Inspection, Change of (Models: 212, 412) | Informational | 5/28/2024 |
407-24-135 | Cyclic Control AFCS Kit Incorrect Hardware, Inspection Of (Model: 407) | Alert | 5/21/2024 |
205A1-24-46 | Main Rotor Hub Pillow Block Inspection Requirements (Models: 204B, 205A1, 205B, 212) | Informational | 5/17/2024 |
205B-24-30 | Main Rotor Hub Pillow Block Inspection Requirements (Models: 204B, 205A1, 205B, 212) | Informational | 5/17/2024 |
212-24-77 | Main Rotor Hub Pillow Block Inspection Requirements (Models: 204B, 205A1, 205B, 212) | Informational | 5/17/2024 |
412RSAF-24-18 | Collective Stick Tube Inspection, Change of (Model: 412RSAF) | Informational | 5/17/2024 |
206L-24-55 | Cyclic and Collective Flight Controls Rigging Requirements (Models: 206L, 206L-1, 206L-3) | Operational | 5/15/2024 |
204B-24-29 | Main Rotor Hub Pillow Block Inspection Requirements (Models: 204B, 205A1, 205B, 212) | Informational | 5/14/2024 |
429-24-21 | Alternative Method of Compliance (AMOC) to Federal Aviation Administration (FAA) Airworthiness Directive (AD) 2024-07-51 (Model: 429) | Informational | 4/23/2024 |
429-24-22 | Global Alternative Means of Compliance (AMOC) with TCCA Airworthiness Directive (AD) CF-2024-11 (Model: 429) | Informational | 4/23/2024 |
205-24-122 | Inspection of Cap Angle, P/N 205-030-207-005, Introduction, of (Model: 205A/205A-1) | Alert | 4/22/2024 |
205B-24-77 | Inspection of Cap Angle, P/N 205-030-207-005, Introduction, of (Model: 205B) | Alert | 4/22/2024 |
212-24-169 | Inspection of Cap Angle, P/N 212-030-191-001, Introduction, of (Model: 212) | Alert | 4/22/2024 |
412-24-197 | Cap Angle, P/N 212-030-191-001, Special Inspection Interval, Reduction of (Models: 212, 407, 412, 429) | Alert | 4/22/2024 |
412-24-197 | Cap Angle, P/N 212-030-191-001, Special Inspection Interval, Reduction of (Model: 412/412EP) | Alert | 4/22/2024 |
412-24-198 | Upper Left Hand Tailboom Attachment Fitting, Sealant Removal of (Model: 412EP) | Alert | 4/22/2024 |
412-24-198 | Upper Left Hand Tailboom Attachment Fitting, Sealant Removal of (Model: 412EP) | Alert | 4/22/2024 |
505-24-37 | Rotorcraft Flight Manual BHT-505-FM-1 Revision 11 and Associated Temporary Revision Cancelations and Updates, Introduction of (Model: 505) | Alert | 4/22/2024 |
407-07-78 Rev B | Aft Fuselage Bulkhead 407-030-027-101 at FS 231.4, Introduction of (Model: 407) | Technical | 4/9/2024 |
407-17-125 Rev A | Aft Fuselage 2-piece Upper Left Longeron Assembly 407-030-067-105, Installation of. (Model: 407) | Technical | 4/4/2024 |
206L-23-188 Rev A | Horizontal Stabilizer and Cargo Hook Fittings – Self Locking Inserts, Inspection of (Models: 206L, 206L-1, 206L-3, 206L-4) | Alert | 3/27/2024 |
429-16-29 Rev C | Fwd Center Firewall Welded Assembly 429-069-501-101/-109/-113 and Aft Center Firewall Welded Assembly 429-069-504-101/-103/-105, Inspection and Repair of (Model: 429) | Alert | 3/27/2024 |
429-24-63 | Tail Rotor Blade 429-016-101-105 Abrasion Strip, Inspection of (Model: 429) | Alert | 3/21/2024 |
206L-24-189 | Main Rotor Mast 206-040-535-109 Airworthiness Life, Increase of (Model: 206L) | Informational | 3/21/2024 |
505-24-39 | Main Rotor Mast 206-040-535-109 Airworthiness Life, Increase of (Model: 505) | Informational | 3/21/2024 |
429-24-62 | Main Rotor Pitch Link Rod End 429-010-433-103, One Time Verification of (Model: 429) | Alert | 3/12/2024 |
429-24-71 | 429-010-108-101 and -105 Grip Assembly Corrosion Protection (Model: 429) | Technical | 2/28/2024 |
412RSAF-24-53 | Cap Angle, P/N 212-030-191-001, Special Inspection Interval, Reduction of (Model: 412RSAF) | Alert | 2/22/2024 |
429-23-60 Rev A | Tail Rotor Shaft Assembly 429-044-201-107, Inspection of and Introduction of Airworthiness Limitation Schedule (Model: 429) | Alert | 2/13/2024 |
407-24-134 | Tailboom Attachment Hardware and Fittings, Inspection of (Model: 407) | Alert | 2/12/2024 |
212-24-75 | Transition To Kamatics Kaflex Main Drive Shaft (Models: 212, 412) | Informational | 1/29/2024 |
412-24-94 | Transition To Kamatics Kaflex Main Drive Shaft (Models: 212, 412) | Informational | 1/29/2024 |
206L-23-188 | Horizontal Stabilizer and Cargo Hook Fittings – Self Locking Inserts, Inspection of (Models: 206L, 206L-1, 206L-3 and 206L-4) | Alert | 1/25/2024 |
407-23-133 | Horizontal Stabilizer and Cargo Hook Fittings – Self Locking Inserts, Inspection of (Model: 407) | Alert | 1/25/2024 |